多机种模拟器MESS&MESSUI 0.147u4发布
http://bbs.emu618.com/data/attachment/forum/201111/15/193413ybu36d8g6udo6ogg.jpghttp://pic90.picturetrail.com/VOL2350/11793858/21120340/350251901.jpghttp://pic90.picturetrail.com/VOL2350/11793858/21120340/350251908.jpg
多机种模拟器MESS发布新版，更新如下：
0.147u4
-------
MAMETesters Bugs Fixed
----------------------
New System Drivers Supported:
-----------------------------
-Sega Visual Memory Unit
-Dragon 2000
-Yamaha MU-100
-Yeno/Vtech Professor Weiss-Alles
-NeoGeo CDZ
-Kaypro 286i
-ASEM AM 64
-Ensoniq KT-76
Systems Promoted from GAME_NOT_WORKING:
---------------------------------------
(none)
Skeleton drivers:
-----------------
-ADC SuperSlave
-Televideo TS802H
-Televideo TS803H
-Genius Leader 8008 CX (Germany)
-V-Tech IQ TV 512 (Germany)
-General Processor Modello T
-Commodore PC-1
-Commodore PC-10 III
-Ensoniq MR Rack
Software Lists:
----------------
-genius: Added software list for VTech Genius cartridges.
-pico.xml: new Japanese dumps added
-added software list for NEC APC
-added PCB readme for FM Towns Marty
-xerox820: Added floppy software list.
-xerox820ii: Added floppy software list.
-pico.xml: added a new Euro dump and better documented some of the older dumps.
-comx35: Added floppy software list.
-ibm5150.xml: added some redumps and new dumps.
-wangpc.xml: added some new dumps from Don Maslin's archive.
-Add another CP/M8-6 version to the ibm5150 software list
-trs80m2: Added floppies to software list.
System Driver Changes:
----------------------
-Sega VMU added more bioses
-qx10: Downgrade floppies to DD
-super6: Added original BIOS.
-APC: Fixed a few missing keys (a few are still missing though), and hooked the rtc clock, command and strobe lines up in a plausible configuration. The status line clock now works though shows an invalid value for year (the upd1990a didn't have a year response, so perhaps whatever rtc is being used here is a later variant which does store a year). The "date set" command doesn't work properly and doesn't even seem to poke the rtc at all. Needs further investigation.
-z800x: Fixed some incorrect opcodes and address register math in segment mode. Olivetti M20 now can boot PCOS to the prompt.
-Minor fix to the character tile row ordering in apc
-esq5505 updates
* Fixed up clocks for 21 vs. 32-voice models
* Added ROMs for the 12-bit sample region on the SD-1 and SD-1 32-voice
* Minor cleanups
-Fixed upd765 SIS status when fid = 4, this makes NEC PC-88VA to attempt to DMA from floppy.
-bw2: Fix disk select and quick hack to make the timings work
-Olivetti M20: improved keyboard and floppy handling
-fixed various bugs with Acorn Archimedes IRQs
-mirage: Make it boot by whatever means necessary
-Finished sample ROM dump for SD-1 & SD-1 32
-Mirage: lots of documentation from the schematics, added preliminary LED hookup
-a7000: Added RiscOS roms 3.60, 3.71, 4.02 and 4.39
-mu100: Main screen turn on!
-pc98: Add its specific almost raw fdi disk format
-macrtc: Remove weird address swizzle that confused systems with extended PRAM
-studio2: Documentation update.
-mu100: Added older BIOS ver 1.05
-Implemented proper IRE and phase value to the palette for Atari 7800
-Mac: added "image" card which allows direct read/write access to any vMac/BasiliskII compatible image under 256 MB, including HD floppies. Disk is bootable if set in the control panel but only can eject from Finder.
-nubus_image: revised firmware allows multiple cards to work
-nubus_image: add eject/insert support
-sf7000: Fixed floppy.
-m20: Implement memory map correctly. BASIC now shows its startup banner.
-vt100: added redumps of some of the vt102/vt131 roms
-vt100: updated a bunch of driver notes and rom defs to reflect current research
-sf7000: Verified floppy format gap sizes.
-vt100: Verified that the checksum of the typed-from-manual 23-018e2 character generator ROM matches the dump from the actual chip.
-sms.c: Improved support for '3-D' games.
-dc: Added European DC bios 1.01c
-mackbd: dumped correct ROM, prep for actual emulation
-a7800.c: Adjusted colorburst/tint/hue of entire palette to closer reflect default hardware configuration setting of ~180 degrees .
Source Changes
--------------
-Added proper char roms for Wyse700
-upd765: Handle the rate correctly in FM
-upd765: Don't choke on DDAMs
-upd765: Reset MA when sector is found on write data too
-imd: Accept versions with single-digit minor
-upd765: Get ready from the correct place in sense interrupt status
-upd765: Better integration and support of FM
-pc floppies: Merge the common parts of d88/imd
-floppy: Fix index pulse generation when motor is always on
-floppy: Added macros for declaring modern floppy formats. The generic floppy formats (D88/DFI/IMD/IPF/MFI/MFM) are now automatically supported in each driver using the modern floppy code.
-wd1772: Improved interrupts, added ready handling and FD1793 variant.
-floppy: Default on head 0, not 1
-upd1771.c - additional comment updates, including some upd1771 patents and internal workings information.
-wd1772: Added FD1771 and FD1797 variants.
-upd765, wd1772: Move to emu
-wd1772: Rename to wd_fdc
-upd765: Externalize the fdc
-wd_fdc: Add comments on the family
-wd_fdc: Change the feature functions into bools, and use the correct pll for each chip
-wd_fdc: Describe track when formatting
-wd_fdc: fm support, need to review all timings
-floppy: Enhance ready support
-wd_fdc: Interrupt on ready support
-upd765.c: changes to busy flag, r/w sector increment and reset int
-upd765: Try another hypothesis
-floppy: restore/recalibrate is supposed to work like this
-wd_fdc: Fix sector sizes and (most) timings
-wd_fdc: Change the fd179x timings to be tighter
http://www.mess.org/
http://messui.the-chronicles.org/
页:
[1]