GBA/NDS模拟器No$GBA v2.8c发布
http://www.emu618.org/data/attachment/forum/201407/29/161602zamm6f26ffs33ffs.jpgGBA/NDS模拟器No$GBA发布新版, 更新如下:
- webpage: added some dev forum links (http://4dsbrew.org and http://gbadev.org)
- help: added "us" to known dsi-regions (including its countries and languages)
- dsi: re-ordered wram as C-then-B (fixes 3780000h boundary issue on us/sysmenu)
- dsi/wifi/help: added specs for WMI commands/events (and for BMI boot-commands)
- dsi/sdmmc/help: added sd/mmc state info (specs when/which command can be used)
- dsi/softreset: allows rebooting dsi firmware via NUM-* (reinit DSi registers)
- dsi: can boot NDS games from within DSi mode (tweaks non4MB via fake_scfg_ext)
- dsi: supports NDS-backwards-compatibility-touchscreen mode (for NDS games)
- dsi: supports NDS-bios-mapping in DSi mode (for NDS games booted via sysmenu)
- dsi: supports firmware-coldboot (when bios_intro enabled with nds_mode=DSi)
- dsi: bugfixed jumps in new wram via addr_code_table (fixes many DSi problems)
- dsi/help: added DSi Atheros Wifi I2C EEPROM info (access and partial content)
- debug/gui: fixed system colors used for cpu-flag checkboxes (swapped red/blue)
- dsi/help: added notes on dumping wifi bios, and on dumping dsi keys from 3ds
- dsi/help: added flipnote fileformat, added notes on \shared2\0000 file
- nds7: emulates disabled bios area being FFh-filled (define_nds7_bios_rom)
- aes: forces instant completion on aes-body-len-zero (boot sysflaw via sysmenu)
- sdio/wifi: initializes 0500458h to ZERO (indicating not firmware yet uploaded)
- dsi/bugfix: moved "sdmmc_try_drain_write_buffer" after status/state handling
- dsi: wifi init mimmicked good enough to run bootcode without WLFIRM 2 error
- dsi/sdmmc: supports card_irq
- dsi/i2c: omits ACK response on non-existing devices (especially A0h/E0h cams)
- dsi/misc: omits arm7 warning on 4004001h access, sets DSi flag in cart.chip.id
- dsi: emulates SCFG_MC register (else hangs after starting a game in bootmenu)
- xtensa: auto-resolves special registers mov opcodes to symbolic sfr_xxx names
- dsi/loader: supports loading AR60xxG.rom (for disass at atheros:8E0000h)
- dsi/mapping: supports MBK mapping to TEAK memory space (for teak disassembler)
- dsi/sdmmc: supports WRITE_MULTIPLE command (requires eMMC image with CID+ID)
- dsi: supports 32bit 4004D00h read, and more 16bit/32bit access for other ports
- dsi/jpeg/help: added notes on computing jpeg/exif MAC signatures (via AES-CCM)
- dsi/sdmmc: emulates fifo16/fifo32, irq-edge-triggering, fixed bits, etc.
- dsi/help: added lots of details on sd/mmc/sdio controller's I/O ports
- dsi/help: updated dsi exploits chapter (notes on resurrected dsiware hax, etc)
- dsi/help: addded teak instruction set specs (encoding, syntax, params)
- dsi/help: added atheros/wifi registers specs (for sdio side and xtensa side)
- dsi/debug: added teaklite II disassembler (see menubar, window, teak)
- dsi/wifi/debug: added xtensa disassembler (see menubar, window, atheros)
- dsi/wifi/help: added xtensa/cpu instruction set and xtensa/cpu register map
- dsi/sdio: partial sdio/atheros simulation (passing most of "PRE-AUTH" phase)
- dsi/help: added sdio specs (cmd52/cmd53 and cccr, fbr, cia areas)
- dsi/boot: fixed initialization of emmc-info in main ram
- dsi/help: added various details (initial ram, etc.)
- nds/debug: optional IPC fifo send/recv logging (in tty debug message window)
- dsi/bptwl: supports writing BPTWL registers (except invalid/readonly ones)
- debug/tty: displays sd/mmc command names, and resolves sdio func:addr's
- debug: accepts mirror of 3800000h at 3FF0000h without warning (common on dsi)
- dsi/help: details on tmd, tickets, and big-endian aes-cbc decryption
http://problemkaputt.de/gba.htm
穷人的福气。干脆也把sfc更新下。 这是什么节奏，以前以为2.6之后就不会更新了，于是2.7不知道什么时候跑出来了，现在倒好2.8都来了，真心的敬佩这个程序的制作者，因为2.6都已经非常非常好了的 这个截图版本是2.7c的，2.8b版本的倒是能找到。是不是弄错了？ 又更新模拟器了 这个模拟器还是不错的。。。。 最早用这个玩nds后来都是用那个d开头的模拟器了
页:
[1]