[多街机模拟器]Mame v0.122u2
更新如下：MAMETesters Bugs Fixed
----------------------
pestplce0122red
hunchbkd0122red
radarscp0122yel
mwalk0122red
qtheater0122u1ora
Source Changes
--------------
Fixed M65C02 optimization.
TMS51xx and M58817 speech updates:
- radarsc1 uses tms5110 speech synth
- cvs games: according to PCBInfos speech chip is TMS5100.
Changed driver to use TMS5100 and "game system operational" now
sounds more natural
- removed sound/m58817.*
- added support for multiple coefficients maps to tms5110.*
- added coefficient maps for TMS5100 and M58817 from documented
sources to tms5110r.c
- fixed interpolation factors (see tms5110r.c for reason)
- made lattice calculation precision 9bit
- added support for READBIT and LOADADDRESS commands to tms5110.c
- more changes in line with various patents
- documented TRS-02, TKG-02/03 "voice" interface
Completed the addition of static qualifiers to all MAME symbols that
aren't explicitly exported.
Named the input_seq_type enumeration and used it explicitly in several
places.
Corrected tx1 and tx1a coinage DSW assignments. Reversed buggyboy/
buggybjr 'Game Time' settings.
TMS3203x core updates:
* fixed interrupt handling
* added support for edge-triggered interrupts on '32
* expanded interrupt support for the '32
* updated drivers using TMS3203x core to deassert interrupts
* added externally accessible functions for converting '3x floating point
format
* updated gaelco3d driver to use new functions
Zeus2 (+related) updates:
* fixed save states for DCS games
* cleaned up Zeus2 waveram handling
* added Zeus2 save state support
* added preliminary model and quad rendering support for Zeus2
* added support to timekpr for the ZPRAM used on Zeus2
* hooked up ZPRAM in Zeus2 games
* hooked up controls in Zeus2 games
* updated poly.c to ensure it is idle before saving state
* Added artifical Z offset of -2 to make the full screen show in crusnexo
Replaced tekken2/tekken2a/tekken2b 'tes1wave.8k' ROM with the
correct, non-byte-swapped dump.
Added discrete 74LS624(56789) implementation
- DISCRETE_74LS624 is a VCO needed for dkongjr
- Supports Logic, Energy and Count outputs
dkong updates:
- Added dkongjr discrete sound
- Proper interface Z80 - I8035 for dkongjr
- Changed discrete sound output factors
- removed samples support for dkongjr
- Cosmetic changes
- Fixed regression in radarscp sound
- Added dipswitch locations to dkong3b
Documentation and clock frequency improvements for seta.c:
- Added the Guru's readme info for Thundercade
- Corrected rom name for Thundercade
- changed clocks to OSC by divider IE: 16000000/2 /* 8MHz */
- Changed Orbs clock to 16MHz with note about 14.xx MHz
- Changed Meta Fox's x0-006 (65c02) to same as Thundercade
- Changed the YM3438 in Ultra Toukond Densetsu from 6MHz to 1600000/4
/* 4MHz */ as there is no mention of 6MHz OSC on PCB
Verified a number of clock frequencies from real PCBs.
Fixed several memory leaks related to SCSI CD emulation.
Removed the increasing of the R register from each IX/IY related
(FD xx or DD xx) instruction on the Z80. According to documentation
and the behavior of the Amstrad CPC driver, this is incorrect.
Added initial FPU support to the SH4 core.
Adjusted most conditional logging in MAME to use the idiom
"do { if (VERBOSE) logerror x; } while (0)". This has the benefit that
the compiler checks the syntax of the logging even in the case it will
be eliminated, and in fact a number of cases here needed adjustments
to compile because of this.
MAMEDev：http://mamedev.org/
新闻来源：emu-france.com
页:
[1]