money_114 发表于 2009-1-8 00:43:09

多机种模拟器MESS 0.129发布

http://pic90.picturetrail.com/VOL2350/11793858/21120340/350251910.jpg
http://pic90.picturetrail.com/VOL2350/11793858/21120340/350251901.jpghttp://pic90.picturetrail.com/VOL2350/11793858/21120340/350251908.jpg

多机种模拟器MESS发布新版,更新如下:

New System Drivers Supported (in no particular order):
----------------------------------------------------------------------
- Ivel Ultra
- Pecom 64
- Sharp MZ80K
- Sony HB-10P/HB-20P
- Yamaha YIS503IIR Russian/Estonian


System Driver Changes:
-------------------------------------
- Added HR graphics.

- Added keyboard simulation.

- Added keyboard simulation and HR graphics.

- Fixed cartridge ROM banking. (bug #1690)

- bug #1661 fixed

- Changed memory handling for the 0xfc00 to 0xfeff memory region on the Master driver, to allow correct debugging of code in this area when ROM is paged in for read.

- Added version 3.20 of the Master MOS, selectable as a bios, as this is the more common version of the bios.

- Fixed up loading of 8K roms as cartriges so that they mirror correctly and don't cause an error on loading, 16K was already working correctly.

- Changed to use MAME's 6850 implemenation. Deleted MESS's private 6850 implementation.

- Fixed Dragon Alpha, via MAME update, the NMI enable/disable allowing disks to boot again.

- Minor cartridge loading code cleanups.

- Added support for the 80 column card.

- Fixed aspect ratio.

- Adds dip switch to select boot eprom version (0.9 or 1.0). Default is 1.0, making it behave as before. To use the old eprom, geneve.zip must contain a file genbt090.bin. Release dates of Geneve and GenMod adjusted.

- Fixed bug #1672.

- Update of Panasonic MSX disk ROMs

- Update of Toshiba HX-20, HX-23 memory map

- Both computers now work, cassette supported

- Fixed CPU and AY clocks based on crystal values from schematics


Source Changes:
----------------
- The core is based on MAME 0.129. This incorporates all features of the update to this core.

- Changed the 8251 UART implementation to be a device.

- Changed the 6551 ACIA implementation to be a device.

- Changed the 8521 RTC implementation to be a device.

- Changed the 8593 RTC implementation to be a device.

- Changed the TMS5501 implementation to be a device.

- Changed the MM58274C implementation to be a device.

- Changed the TTL74145 implementation to be a device.

- Changed the UPD7002 implementation to be a device.

- Changed the TMS9901 implementation to be a device.

- Changed the TMS9902 implementation to be a device.

- Changed the I8271 implementation to be a device.

- Changed the WD17XX implementation to be a device.

- Changed the NEC765 implementation to be a device.

- Changed the SAM6883 implementation to be a device.

- Changed the RP5C15 RTC implementation to be a device.

- Changed the 6525 TPI implementation to be a device and added save state support.

- Various code cleanups.

- Fixed regression that could cause hanging when creating an image from the command line or the MESSUI. (bug #1744)

- Changed cartridges to be MAME devices.

http://www.mess.org/

总之是个多机种bt模拟器,你知道的机种,不知道的机种,几乎都能模拟
图为md系统;P

fzhhd 发表于 2009-1-8 09:48:32

ajaxzhou2633 发表于 2009-1-8 11:41:53

路过支持下。。。ms这模拟器的rom在某站需要计算流量~

wjzj5886 发表于 2009-1-9 11:21:47

:@ 太强大了 现在都搞兼容性的啊
页: [1]
查看完整版本: 多机种模拟器MESS 0.129发布