MSX模拟器OpenMSX v0.10.0发布

money_114

MSX模拟器OpenMSX发布新版, 更新如下:

MSX device support:
- accuracy improvements:
  - improved TMS99X8/TMS9929 color palette
  - improved V9990/GFX9000:
    - VRAM reads go via 1-byte buffer
    - VRAM read/write pointers only get updated when R#2 and R#5 get written
    - fixed initial content of VRAM of GFX9000
    - V9990 P1/P2 sprites that are disabled still count for the 16 sprite limit
    - fixed roll behaviour of layer B in P1 mode
  - turboR TC8566AF has other register memory mapping than other machines
  - use correct Kanji font ROM for Victor HC-95A and removed S1985
  - added cycle accurate VDP command engine timing (can be disabled with the new too_fast_vram_access setting)
  - fixes in YM2413 emulation (FMPAC)
- added mapper support:
  - MSXtra cartridge (a debugging tool released by PTC which has its own RAM)
  - MultiROM Collection, designed by Manuel Pazos in 2006
  - ASCII8 mapper with 2kB SRAM
  - ASCII16 mapper with 8kB SRAM
  - Super Swangi (a.k.a. Super Altered Beast)
- added support for MSX touch pad
- added mu-PACK extension, a MIDI module to upgrade a turboR ST to GT
- added support for large hard disk images and LaserDisc images (>4GB)
- added initial RAM patterns for Sony HB-F1XDJ and Sanyo PHC-23J
- added support for Neos MA-20 Version Up Adapter (MSX1 to MSX2 converter), insert both Neos_MA-20R and Neos_MA-20V extensions for this
- fixed Toshiba MSX-AUDIO with no sample RAM
- fixes in joystick, mouse and track ball emulation
- minor fixes in Y8950 (MSX-AUDIO) and YMF262 (MoonSound)
- added OPL3Cartridge2_mono and OPL3Cartridge2_stereo extensions
- added Yamaha SFG-01 extension and replaced the SFG-05 with the SFG-01 in the CX5M machine
- added an experimental Boosted_MSXturboR with IDE machine config
- added Casio PV-16, Casio P-7, Casio MX-10, Goldstar FC-80U and Sony HB-F1XV machines and an experimental Zemmix Super V (Daewoo CPC-61) machine config

New or improved emulator features:
- added subdirectory support for dir-as-disk
- added configurable host to MSX joystick mapping, e.g. useful to bind the crawl command (button A+B) in Metal Gear 2 to a single PC joystick button
- added support for bash completion (useful for using openMSX on the bash command line)
- performance improvements:
  - improved start-up performance (on Dingoo openMSX starts over 20% faster)
  - reduced CPU overhead when enabling reverse
  - further optimized CPU emulation
  - sped up CAS loading (use 3744 baud instead of 2760 baud)
  - reduce input latency (poll host events more often and remove delays)
  - speed up reverse in combination with harddisk by using incremental hashing
- reverse/TAS:
  - added reverse subcommand to truncate the current replay
  - show two decimals in the reverse bar time
  - added setting to prevent the reversebar from fading out and made that the behaviour in TAS mode
  - added bookmarks feature to reverse bar
  - added possibility to customize TAS key bindings in an external script
  - added setting to auto save replays at intervals
  - added command to reset the lag counter
  - added commands to go to frame boundaries and advance/reverse to frame boundaries
  - show values of TAS widgets also in the middle of a frame
- several improvements on the OSD menu:
  - several improvements on the file browser
  - better error handling
  - only show media menu options that are relevant for the current machine (e.g. do not show disk drives when the machine has none)
  - added support for LaserDisc
  - added a quit menu with confirmation
  - added limitsprites setting
  - added basic mouse/touch support, including:
    - right click to close current menu
    - support for scrollwheel of mouse to scroll in lists
  - only show video options if they actually make sense
  - added option to make current machine default (started when launching openMSX)
  - added resampler setting (for performance tuning)
  - added detailed sound chip control (balance, volume, per channel mute)
  - added possibility to browse to other drives on Windows
  - added possibility to insert a new tape in the cassette player and made it easy to browse to your newly created tapes
  - added short cuts to browse to your file pools (if they contain stuff)
  - added confirmation dialog before overwriting existing save states
  - added feedback when executing actions like inserting disk, saving state
- remove SSE and MMX assembly routines, only keep rewritten SSE2 routines
- added interleaving with black frame for monitors with LightBoost support
- added OSD widget that displays how busy the VDP is
- enable grab on fullscreen (workaround for Mac issue)
- added Cmd+I hotkey to press Insert key on Mac

Build system, packaging, documentation:
- created Android port (available via Google Play)
- migrated to git
- updated Windows build to Visual Studio 2012 update 3
- prepare for Visual Studio 2013 (next release will be built with it)
- now a compiler which supports C++11 is required to compile openMSX, like g++ 4.6, clang 3.0 or Microsoft Visual Studio 2012
- integrated Dingoo packaging in the build system
- better support for 64 bit systems (sizes, memory, etc.)
- added document about details on VDP command engine timing
- changed machine configurations from specific directories to just an XML file
- removed the GP2X port
- Mac support is now limited to Mac OS X 10.7 (so 64-bit only) and higher

http://openmsx.sourceforge.net/

ABC3637

当年的次世代主机...