EMU618社区

 找回密码
 立即注册
搜索
查看: 906|回复: 1

[新闻] Atari 800模擬器Altirra 1.9發佈

[复制链接]

该用户从未签到

发表于 2011-5-19 09:50:27 | 显示全部楼层 |阅读模式



Atari 800模擬器Altirra發佈新版,更新如下:

    [features added]
    * Debugger: Multiple memory access breakpoints can now be placed.
    * Debugger: Added option to break on run address of loaded executable.
    * Debugger: Conditional breakpoints (bx) are now supported.
    * Debugger: Commands can now be run when a breakpoint fires.
    * Debugger: Added ? (evaluate) and .printf commands.
    * Debugger: Trace and assert statements can now be embedded in assembler listings.
    * Debugger: Added vta, vtc, vtl, and vtr commands to control verifier OS entry point checking.
    * Debugger: Added .dumpsnap command.
    * Debugger: Memory access breakpoints can now be placed on an address range.
    * Debugger: History window now has a Copy Visible context menu option.
    * Debugger: Verifier modes are now configurable.
    * Debugger: Verifier can now catch register corruption across interrupts.
    * Debugger: .writemem now supports extended address syntax.
    * Debugger: Added .sio command.
    * Debugger: Added .sdx_loadsyms command.
    * SoundBoard: Initial support.
    * UI: Added emulator crash dialog.
    * UI: Show FPS option now also shows CPU usage.
    * Input: Added Amiga mouse support.
    * Input: Added CX-85 keypad support.
    * GTIA: NTSC and PAL modes can now have separate palettes.
    * GTIA: Added option for PAL encoding quirks.
    * GTIA: Added PAL high artifacting mode.
    * Disk: Initial version of disk explorer.
    * Serial: Inbound connections are now supported.
    * Serial: Added support for A, L, M, P, Q, S, T, V, X, &C, &D, &F, &G, &P, &T, &V, and &W modem commands.
    * Serial: Added DTR and CRX signal support.
    * Serial: Added IPv6 support.
    * Serial: Added option to force specific connection and DTE communication rates.
    * Serial: Added option to bypass accurate serial port rate throttling.
    * Cartridge: Two cartridges are now supported for 800 left+right and stacked cartridge configurations.
    * Cartridge: 2K and 4K cartridges are now supported (as mirrored 8K cartridges).
    * Cartridge: SIC! cartridge support.
    * PCLink: Initial support.

    [bugs fixed]
    * UI: Pane dragging is less twitchy and no longer undocks a pane as soon as you click on the caption.
    * UI: Fixed undocked panes getting lost on exit when no other panes were docked.
    * UI: Optimized Direct3D9 code to reduce flickering when switching artifacting modes.
    * UI: Fixed current beam position indicator not updating properly when stepping with interlacing enabled.
    * UI: Auto-size command now works when menu wraps.
    * HLE: Fixed crash when NMI handler is invoked with no NMIs pending.
    * HLE: Added support for XL OS PENTV vector.
    * HLE: E: device now excludes prompts from data returned by get-line commands.
    * HLE: Increased HLE kernel compatibility with SpartaDOS X.
    * HLE: Fixed BASIC ^ operator with HLE kernel or floating-point acceleration.
    * HLE: Fixed AFP not accepting leading spaces (which broke the Atari BASIC READ statement).
    * Simulator: Default kernel mode now prefers ROM images properly again.
    * Simulator: BOOT? and DOSINI are now set at the beginning of EXE/XEX loads to support more WARMSV tricks.
    * Cheats: Enable checkbox on cheats was broken.
    * CPU: Added missing SHA abs,Y ($9F) instruction.
    * CPU: Fixed CMOS BIT #imm ($89) instruction.
    * CPU: Fixed 65C02 $FC instruction.
    * CPU: Back-to-back interrupts are no longer allowed.
    * CPU: Added emulation of BRK/NMI bug.
    * CPU: Added option to emulate masked NMIs (off by default).
    * CPU: Fixed dp,X, dp,Y, and (dp,X) page wrapping behavior in 65C816 E=1 mode.
    * ANTIC: DMACTL bits 6 and 7 are no longer reflected in .dlhistory output.
    * ANTIC: Fixed CPU not being halted when playfield DMA occurred on cycle 10.
    * ANTIC: Fixed timing of when VSCROL affects DLIs.
    * Debugger: Optimized History pane.
    * Debugger: Avoid re-requesting the same source file when it is not found on disk.
    * Debugger: Improved reliability of source-level stepping.
    * Debugger: Added XL OS entry points to default entry points allowed by verifier.
    * Recorder: Fixed crash on recording errors.
    * Recorder: Fixed incorrect format on video stream when using ZMBV compression.
    * Disk: SIO receive speeds are now validated for more reliable high-speed SIO detection.
    * Disk: VAPI (ATX) images can now be loaded from .zip files.
    * Disk: Fixed problems binding disk images to D9:-D15:.
    * GTIA: NTSC high artifacting mode now respects artifact phase setting.
    * GTIA: Fixed trigger state sometimes being initially wrong when enabling latching.
    * GTIA: Improved accuracy of transitions from mode 8 to mode 9/10.
    * GTIA: Fixed hires lines not artifacting correctly with the extended PAL height setting enabled.
    * Serial: Telnet emulation now reads out of band data.
    * Serial: Telnet emulation now handles incoming WILL and WONT commands.
    * Serial: Telnet server now attempts to turn off local echo on remote end.
    * Serial: Fixed sporadic missing newlines on modem status messages.
    * Serial: Control line state is now reported in non-concurrent mode.
    * Serial: Ring pattern adjusted to match US standard (2s/4s).
    * Serial: Re-opening the R: device now flushes buffered data.
    * Serial: Closing the R: device deactivates concurrent mode to make subsequent status requests work.
    * Serial: Fixed crash in R: when invoking GET BYTE with an empty input buffer or PUT BYTE with a full output buffer.
    * Serial: Fixed BASIC GET command failing after XIO on R:.
    * Serial: Fixed erroneous CR-to-CRLF conversion on transmit path.
    * Serial: XIO commands to R: instead of R1-R4: now work properly.
    * Serial: Closing R: waits for queued output data to flush.
    * Printer: Fixed close command not actually closing IOCB.
    * VBXE: VBXE memory no longer overlays extended memory in 1088K mode with shared memory disabled.
    * IDE: Cold reset now also resets the emulated IDE device.
    * IDE: Addressing is now restricted to offsets $00-07 to avoid conflicting with OS PBI scan.
    * Cartridge: Corrected banks 1 and 2 for OSS 034M cartridge type.

http://www.virtualdub.org/altirra.html

该用户从未签到

发表于 2011-6-4 12:57:58 | 显示全部楼层
很像FC呀{:4_108:}
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|国治模拟精品屋 ( 沪ICP备15012945号-1 )

GMT+8, 2024-11-19 04:16 , Processed in 1.064453 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表