多机种模拟器MESS&MESSUI 0.149发布

money_114

多机种模拟器MESS发布新版，更新如下：

MAMETesters Bugs Fixed
----------------------
- 05127: [Misc.] (paso1600.c) paso1600: Invalid read of size 4 (Robbbert)
- 05160: [Crash/Freeze] (thomson.c) to8, to8d: Access Violation with "-ramsize 262144 -cart 6809ass2" (Wilbert Pol)


New System Drivers Supported:
-----------------------------
- Otrona Attache [Al Kossow, Barry Rodewald]


Systems Promoted from GAME_NOT_WORKING:
---------------------------------------
- BOB-85 [Robbbert]
- SSE SoftBox [Curt Coder, Mike Naberezny]


Skeleton drivers:
-----------------
(none)


Software Lists:
----------------
-horizon.xml: Added floppy images. [Dave Dunfield, Andrew Lynch]
-cpc_flop.xml: added the available SPS release. [Kaylee]
-softlist: added list for Otrona Attache disks. [Kaylee]
-vsmile.xml: added new German dumps. [TeamEurope]
-hx20: Added floppy software list. [Curt Coder]
-softbox: Added floppy software list. [Mike Naberezny]
-qx10: Added floppy software list. [Curt Coder]
-ep64_cart.xml: Added cartridge software list. [Curt Coder]
-ep64_cass.xml: Added preliminary cassette software list. [Guru, Curt Coder]
-ep64_flop.xml: Added floppy images. [Curt Coder]
-ti99_cart.xml: Almost all cartridges available. [Michael Zapf]


Source Changes
--------------

-superslave: Refactored serial terminal to connect to an RS-232 port. [Curt Coder]
-mpz80: Fixed terminal. [Curt Coder]
-Added RS-232 ports to several drivers. [Curt Coder]
-vk100/vt100: Added RS-232 port and COM5016T baud rate generator. [Curt Coder]
-atarist: Added RS-232 and MIDI ports. [Curt Coder]
-sdk86: Added serial terminal. [Curt Coder]
-ql: Added RS-232 ports. [Curt Coder]
-psxcd: fix cdda [Carl, Dr. Venom]
-votrtnt: Added serial terminal [Robbbert]
-68ksbc: Added serial terminal [Robbbert]
-applix: Major improvements, system is mostly working [Robbbert]
-altos5: Major improvements [Robbbert]
-sms/gamegear: Various improvements [Fabio Priuli]
* Converted cart handling and mappers to use slot devices
* Simplified bios and cart bankswitch mechanism
* Added save state support to both systems
* Removed on-cart EEPROM from main gamegear now that it can be properly implemented on carts which have it
* Added support for the card slot to Master System I console; use the -card switch to load Sega Card/MyCard dumps in the emulated system
* Added backward compatibility to SG-1000 Mark III, for SG-1000 games
* Made LCD persistence hack optional (ON by default, it can be turned OFF from Driver Configuration submenu)
* Reduced tagmap lookups all across the driver
* Updated the systems to rely on xml only for RAM/NVRAM when loading from softlist
-Ignore unformatted tracks in dsk files [smf]
-td0_dsk: add new floppy system support for teledisk [Carl]
-ehx20: Added slave CPU ROM dump. [Kevtris]
-sg1000: converted the driver to use the new sega 8bit cart slot. [Fabio Priuli]
-sg1000: added emulation of the Card Catcher passthrough cart. [Fabio Priuli]
-gba: updated the driver to use slot devices for carts and removed on-cart flash ram devices from main gba now that they can be properly implemented on carts which have them [Fabio Priuli]
-gba: made save states more robust. [Fabio Priuli]
-nes: fixed nvram mirroring in Family Circuit '91 (Namcot-175 board), the game still has some issue when saving to NVRAM. [Fabio Priuli]
-intv: converted the STIC video chip emulation to be a device. [Fabio Priuli]
-sp0256: modernized the SP0256 Narrator Speech Processor sound device. [Fabio Priuli]
-intv.c: added support for save states to all systems of this driver. [Fabio Priuli]
-coleco: added missing input-related variables to save states, which should now work. [Fabio Priuli]
-pasogo.c: Added readme.  [Guru]
-qx10.c: Hook keyboard up to serial controller [Carl]
-pce.c: converted carts to use slot devices [Fabio Priuli]
-pce.c: moved the cd addon to be a separate device. now save states work in the driver for HuCard games, not yet for CD games. [Fabio Priuli]
-pv1000.c: modernized the sound device and added save state support. [Fabio Priuli]
-scv.c: simplified input reading and added save state support [Fabio Priuli]
-softbox: Promoted driver to working. [Curt Coder, Mike Naberezny]
-Fixed IEEE-488 bus reset on Commodore drives. [Curt Coder]
-enterp: modernized the Dave sound chip. [Fabio Priuli]
-softbox: Added Corvus hard disk. [Curt Coder, Mike Naberezny]
-pet: Implemented SoftBox IEEE-488 peripheral mode, where a PET computer is used as terminal. [Curt Coder, Mike Naberezny]
-enterp: converted the Nick Graphics Chip to be a device. [Fabio Priuli]
-Fix for Apollo PIC8259 breakage [Hans Ostermeyer]
-gba.c: simplified video code, removing many redundancies. [Fabio Priuli]
-abc80x, abc1600: Added Luxor ABC keyboard port slot interface. [Curt Coder]
-softbox: Added CP/M hard disk installation instructions. [Mike Naberezny]
-pet8032: Fixed lowercase mode. [Mike Naberezny]
-concept: added stub implementation for the expansion slots as slot devices in place of previous outdated custom one. [Fabio Priuli]
-Corrected pitch and readback behavior for the ALF Apple Music II, and noted it's the same as the ALF AM1. [R. Belmont]
-BOB85: fixed Next key, enabled pasting with standard trainer keys, marked as working [Robbbert]
-softbox: Fixed LEDs. [Mike Naberezny]
-Modernized MEA 8000 sound device. [Fabio Priuli]
-Modernized the Mac Sound device. [Fabio Priuli]
-Modernized uPD1771c sound device. [Fabio Priuli]
-gizmondo: converted the GF4500 to be a device. [Fabio Priuli]
-ip22: converted the SGI Newport graphics board to be a device. [Fabio Priuli]
-enterp: Added Guru-readme and fixed setnames. [Guru]
-Modernized MC68328 (DragonBall) device. [Fabio Priuli]
-pc.c: Added t1000sl2. Hooked up the Tandy 1000 character rom to the other Tandy 1000 drivers. Reimplemented Tandy 1000 ROM banking according to the schematics.  [Cowering, Wilbert Pol]
-Modernized VT100/Rainbow video device. [Fabio Priuli]
-Modernized VIC3 video device. [Fabio Priuli]
-Modernized uPD71071 DMA device. [Fabio Priuli]
-Modernized DS1315 clock device. [Fabio Priuli]
-dsk_dsk: Fixed incorrect sector size bug preventing standard DSK images from working. [Barry Rodewald]
-Modernized Samsung S3C44B0 device. [Fabio Priuli]
-Modernized AY-3-1015 device. [Fabio Priuli]
-bml3.c [jedwidz]
* improved keyboard
* improved video
* disk support
-megadriv: emulated protection for 16 Mahjong Tiles II and Tekken Special [EkeEke, Fabio Priuli]
-ep64: Modernized the Enterprise 64/128 driver. [Curt Coder]
-pet8032: Fixed natural keyboard. [Mike Naberezny]
-marked Game Boy, Game Boy Color, Game Boy Advance, Game Gear, Intellivision, Lynx, Master System, MegaDrive / Genesis, NES / Famicom, Neo Geo Pocket, Neo Geo Pocket Color, PV-1000, Super Cassette Vision, Super NES / Super Famicom, Wonderswan and Wonderswan Color as supporting save states. PC-Engine supports save states too, but only for HuCard games and not for CDs. Please report issues with save and restore in these systems, if any, to MameTesters. [Fabio Priuli]
-ql: Added Merlin Tonto ROM dumps. [Ash Evans]
-pet4032: Fixed natural keyboard. [Mike Naberezny]
-terminal: Fixed natural keyboard. [Mike Naberezny]
-n64: improved PIF / RDRAM initialization [Joe]
-wangpc: Use medium resolution video controller by default. [Curt Coder]
-ti99: Added a new cartridge type "gromemu" for GROM emulators

http://mamedev.org/release.html
http://messui.the-chronicles.org/

simper

网上也找不到教程，这模拟器搞太复杂，实在是玩不懂