EMU618社区

 找回密码
 立即注册
搜索
查看: 179|回复: 1

[新闻] [PCE\PCE-CD模拟器]Ootake 2.94

[复制链接]

签到天数: 1772 天

[LV.Master]伴坛终老

发表于 2019-12-27 11:52:46 | 显示全部楼层 |阅读模式


  2019/12/25 2.94 released
  - "*About Windows Display-Lag" was added to "Screen" menu.
    Displays the Windows (video card control panel) setup method for "realizing
    low display-lag" with V-Sync.
    The following is the contents.
    ////
    Windows settings are required to run Ootake with the same operational
    feeling as a real machine. If the Windows graphic driver is set to perform
    vertical synchronization (V-Sync), it will interfere with the Game's
    V-Sync and cause "Display Lag".

    <Setting method on Windows for Eliminate Display-Lag>
    Right-click on an empty area of the desktop and open Settings (Control
    Panel) of the video chip maker(NVIDIA, AMD, Intel) and set "Vertical sync"
    in "3D(game) settings" to "Off".
    * These settings can be made for each game with NVIDIA and AMD.

    With GeForce, if Windows10/8, set "Low Latency Mode" to "Off" at the same
    time (necessary to reflect the vertical sync off).
    For Windows7(Non-Aero) and earlier, it is recommended to set "Low Latency
    Mode" to "Ultra" to further reduce the display lag.

    "Ultra" at "Low Latency Mode" is recommended for Win7(non-Aero).
    On the contrary, please pay attention that "Off" at "Low Latency Mode" is
    recommended for Win10/8 (in case of Ootake).
    * This situation may change depending on future driver updates.
    ////
  - The program has been optimized so that even the "PC with power saving
    settings"  will not lose processing and will operate like a real machine.
    * In addition, if you use "MSI AfterBurner (video card utility software)"
      which is considered to be used by a large number of users, if power
      saving is set, processing will periodically drop and Ootake is not
      working smoothly (The same problem exists for games with a low GPU load
      other than Ootake).
    * In the case of using AfterBurner or in a PC environment where the
      processing drops even with v2.94 this time, set the power saving setting
      in the control panel of the video card driver (for GeForce "Manage 3D
      Settings"->"Power management mode"), try setting to not save power (
      "Prefer maximum performance"). By the way, AfterBurner's similar
      software "ASUS GPU Tweak II" works comfortably without the Ootake
      processing drop even if the PC was set to power saving (With even MSI's
      video card works well).
  - Made the gamepad settings easier. Directional pad is common setting for
    all 2-button, 3-button and 6-button pad settings, and only button setting
    is set for 2-button, 3-button and 6-button pad respectively.
  - Corrected left and right black belt processing in horizontal 352 dot mode.
    In the scene of "Ijuin appearance" of "Tokimeki Memorial", the problem
    that white flash processing was spread too much was solved.
  - When "R-TYPE Complete CD" is played so that flickering of sprites is not
    reproduced (default), the black band display on the left and right sides
    of the screen is visible without being hidden (similar to the HuCard
    version). In addition, "R-TYPE (U)" has been operated in the same way (
    I had an overseas person check the operation. Thank you).
  - Added "FullScreen 240Hz" to the "Screen->FullScreen Customize" menu.
  - Added (Revived) "DirectDraw (Old)" to the "Setting-> Screen" menu. Drawing
    with DirectDraw was deleted in v2.92, but this time it has been restored.
    Although it is an old drawing method for PC of the age of Windows95, it is
    still useful when using "low resolution full screen". Use it when you want
    to display dot-by-dot with cathode ray tub (CRT). In addition, when
    drawing DirectDraw, the display of "Sound Graph (Info-> Show Audio Channel
    Graph)" and "x5 times display" added in v2.92 are not supported. With
    DirectDraw, even when new functions are added in the future, new functions
    are probably not supported due to development time.
  - When resume loading each game, "Window non-stretch setting at the last
    play" is also restored. Basically, most games are well made to the 4:3
    ratio, so it's not recommended unless personally enough, but if you have a
    game that is easier to play with dot-by-dot, use it Please do it.
  - When overscan area display switching (F11 key) is performed in the window
    mode, centered the window (center position adjustment) for both horizontal
    and vertical.
  - When switching from full-screen display to window display, if the
    resolution setting for full-screen display was set low (default), fixed a
    bug that reduced the size of the window display.
  - Fixed a problem that V-Sync was not perfect and tearing occurred depending
    on some PC environment when playing in the "x4" window size.
  - Other minor details have been fixed and improved.
  + I began Twitter. (Japanese language & a little English language)
    http://twitter.com/kitao_n
  * The happiness of the game is the world human race commonness. It longs for
    peace.
  * I think that it cannot do improvement & correction of the above-mentioned
    if there are many neither operation report nor defect report. Thank you
    really for you who reported.

[发帖际遇]: 疾风之狼 在论坛发帖时没有注意,被小偷偷去了 2 个 柠檬. 幸运榜 / 衰神榜

签到天数: 5 天

[LV.2]偶尔看看I

发表于 2020-1-13 14:51:19 | 显示全部楼层
想不到这个模拟器还在更新啊{:4_92:}
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|国治模拟精品屋 ( 沪ICP备15012945号-1 )

GMT+8, 2024-11-18 09:27 , Processed in 1.067383 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表